Tensile Tester | Box Compression Tester | Digital Torque Tester » Tensile Testing Machine http://www.tensile-and-elongation.com Tensile Tester is applicable in the test of physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective film, leather, rubber and paper fiber, etc. Fri, 13 Feb 2026 09:25:23 +0000 en hourly 1 http://wordpress.org/?v=3.0.3 Loop Tack Test for Adhesive Tapes http://www.tensile-and-elongation.com/loop-tack-test-for-adhesive-tapes.html http://www.tensile-and-elongation.com/loop-tack-test-for-adhesive-tapes.html#comments Tue, 08 Jan 2019 07:12:29 +0000 admin http://www.tensile-and-elongation.com/?p=111 Loop Tack Test is one common test method to measure the tack strength of adhesive tapes, which is descripted in ASTM D6195. The standard describes two ways to perform the look tack test for adhesive tapes. One is loop tack tester. But it is uncommonly used since its sole test function. The other way to use tensile testing machine or universal testing machine. Same as using the single purpose machine, you can also get accurate test results. Besides this, you can also perform many other common adhesive and material tests such as 90 degree peel adhesion tests, 180 degree peel adhesion tests, and standard tensile strength testing.

Here is a short video of loop tack test for adhesive tapes by Labthink Tensile Testing Machine.

Loop Tack Test for Adhesive Tapes

Labthink Tensile Testing Machines are featured by easy-to-use, high accuracy, customized for various test items. We have Single Column Tensile Machine, Double Columns Tensile Testing Machine and Horizontal Tensile Tester for your option. Based on different industries, we also have various test loads to maximize the test accuracy and cost saving.

]]> http://www.tensile-and-elongation.com/loop-tack-test-for-adhesive-tapes.html/feed 0 Flexible Packaging Materital Tensile Properties Measurement by tensile testing http://www.tensile-and-elongation.com/flexible-packaging-materital-tensile-properties-measurement-by-tensile-testing-tensile-tester.html http://www.tensile-and-elongation.com/flexible-packaging-materital-tensile-properties-measurement-by-tensile-testing-tensile-tester.html#comments Tue, 09 Oct 2012 03:42:05 +0000 trade http://www.tensile-and-elongation.com/?p=83 Tensile properties indicate how the material will react to forces being applied in tension. A tensile test, also known as tension test, is a fundamental mechanical test where a carefully prepared specimen is loaded in a very controlled manner while measuring the applied load and the elongation of the specimen over some distance. Tensile tests are used to determine the modulus of elasticity, elastic limit, elongation, proportional limit, reduction in area, tensile strength, yield point, yield strength and other tensile properties.

Tensile properties of thin film used in Flexible packaging are tested according to ASTM D882–Standard Test Method for Tensile Properties of Thin Plastic Sheeting, standard ASTM D828 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus and ISO 37 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties.

The most common testing machine used in tensile testing is the universal testing machine. The machine must have the proper capabilities for the test specimen being tested. There are three main parameters: force capacity, speed, and precision and accuracy. Labthink Tensile Testers are professional designed for flexible packaging materials, such as thin film, rubber, paper and paperboard, with proper force capacity, speed, travel stroke and high precision and accuracy.

Labthink XLW(PC) Tensile Tester is controlled by computer with better than 0.5% of reading accuracy to used as an universal testing machine,. It is not only used for tensile test, but also can do peel strength test, seal strength test, tear strength test according to relative international standards.

XLW(PC) Labthink Tensile Tester

Features of labthink Tensile tester:
1. 7 independent test modes are available, including tensile strength, peeling force, tearing force and other force properties of flexible packages
2. 1000mm extra-long stroke
3. Controlled by a micro-computer with menu interface, PVC operation panel and large LCD display
Technical Specifications of XLW(PC) Tensile tester
1. Force Capacities: 500N, 50N
2. Accuracy: <0.5% of reading value
3. Test Speed: 50, 100, 150, 200, 250, 300, 500 mm/min
4. Stroke: 1000 mm
Applicable tests:
Tensile Property
Test of Tensile Strength and Elongation Rate
Test of Tensile Strength at Break
Tear Resistance Test
Heat Seal Strength Test
90 Degree Peel Test
180 Degree Peel Test
Applicable Materials:
Plastic films, Laminated films, rigid plastic, paper and paper board, textile, fabrics and other materials within test range
Standards
ISO 37, ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113
]]> http://www.tensile-and-elongation.com/flexible-packaging-materital-tensile-properties-measurement-by-tensile-testing-tensile-tester.html/feed 0